EZ Boilers Outdoor Stoves

EZ Boilers Prices & Specifications

Quality at a discount

Outdoor Stoves – How To Order

Call or text us at (231) 823-2499.

Delivery is available! $200.00 up to 60 miles from Hersey, Michigan. It’s an extra $2.00 per mile for each mile over that 60 miles distance.

You can also come to our factory in Hersey, Michigan, and we will load the stove onto your trailer for you. The stove can also be loaded onto the back of a full sized pickup truck. Always bring strong ratchet straps to secure the unit to your trailer or truck.

Please call us anytime for free helpful advice should problems arise, before, during, or after installation.

Outdoor furnaces are ideal for both residential and commercial applications. We look forward to helping you select the right furnace model for your needs. Call or text us at:

(231) 823-2499

Free tech support 7 days a week including holidays.

EZ-Classic 5,000 sq.ft. stove

EZ-Classic Current Price = $7,799

Plus save an extra $400 by paying with cash!

Cash price = $7,399 out the door!!!

EZ-Pro 7,500 sq.ft. stove

EZ-Pro Current Price = $8,399

Plus save an extra $400 by paying with cash!

Cash price = $7,999 out the door!!!

(Cash means real cash. Checks and credit/debit cards do not qualify for the cash discount.)

We now recommend Enhancify Financing if you prefer to make monthly payments. Click the link below to see what they offer.

Disclaimer: EZ Boilers does NOT handle the financing. Enhancify Financing is an entirely independent company.

FINANCING

As a BONUS, with each stove purchased, we include the sight gauge, our custom-designed Ash Rake, a spare Solenoid, and one quart of nitrite water treatment for free, a $164.00 value.

Pumps are NOT included with the stove.

DELIVERY

We do have delivery available!!!

$200.00 up to 60 miles from Hersey, Michigan.

$2.00 per each extra mile over that 60 miles.

We will unload the boiler and place it where you want it, within the limits of our loader.

INSTALLATION ACCESSORIES

We also sell a basic accessory kit which consists of the major components necessary for a new installation, for the low price of $1,399. The kit includes:

75 Feet Triple Wrap Insulated PEX Line
Heat Exchanger for Indoor Furnace
20 Plate Heat Exchanger for hot water heater
Small pump. Will pump 100 ft. horizontally, and 10 ft. vertically.
2 - 1" Ball Valve Pump Flanges

EZ Boilers Accessories Kit

The accessories included with the stove are necessary for its installation and operation. However, since each installation is unique, it is not economical to include every possible needed part. Your local hardware store will carry the additional parts and fittings to complete the installation. We can also customize the kit to suit your needs, with prices adjusted accordingly. SupplyHouse, an online vendor, also carries a wide selection of plumbing parts at very reasonable prices. We can arrange for the kit to be directly shipped to your home or business.

SupplyHouse

Stove Comparison

Specifications	EZ-Classic	EZ-Pro
Approximate heating capacity	5,000 sq.ft.	7,500 sq.ft.
Water capacity	125 Gallons	150 Gallons
All ports	1” NPT	1” NPT
Door size	24” x 24”	24” x 24”
Door insulation	2200°	2200°
Firebox diameter	36” (Round)	36” (Round)
Firebox length	47”	59”
Chimney size	8” Schedule 40	8” Schedule 40
Firebox thickness	1/4”	1/4”
Water jacket thickness	3/16”	3/16”
Approximate weight	1,450 lbs.	1,800 lbs.
Stove insulation	1” foam board plus thermal wrap	1” foam board plus thermal wrap
Electronics	LED Aquastat (older stoves) Honeywell Solid State Aquastat on current EZ Boilers stoves.	LED Aquastat (older stoves) Honeywell Solid State Aquastat on current EZ Boilers stoves.

The water capacity of each stove has been engineered for maximum efficiency and operation. A larger water tank would allow the stoves to cycle on and off less frequently; however, during milder weather, the time period between cycles would become great enough to result in a smoldering pile of ashes and wood that struggles to come back to life when needed. It would also cause more smoke and damaging creosote formation. Our stoves are designed to produce a smooth, steady transfer of heat that keeps your home warm and comfortable 24 hours a day.

We are now using using NEW 1/4" rolled steel for our fireboxes, welded inside and outside. The shape is absolutely identical to the outer water jacket, permitting a smooth and even transfer of heat from the firebox to the surrounding water.

Choosing the right size stove

Our EZ-Classic holds 125 gallons of water and heats up to 5,000 sq. ft. Our EZ-Pro holds 150 gallons of water and heats up to 7,500 sq. ft. Many people opt for our larger stove just in case they decide later to heat an additional building. The total amount of water in the system varies depending upon the amount of PEX water pipe needed for any particular installation. The two models are the same mechanically, but with different size fireboxes.

The water capacity of each stove has been engineered for maximum efficiency and operation. A larger water tank would allow the stoves to cycle on and off less frequently. However, during milder weather, the time period between cycles would become great enough to result in a smoldering pile of ashes and wood that struggles to come back to life when needed. It would also cause more smoke and damaging creosote formation. Our outdoor wood boilers are designed to produce a smooth, steady transfer of heat that keeps your home warm and comfortable 24 hours a day.

PEX WATER LINES

The insulated PEX can be temporarily installed above ground for winter installations, and buried in the spring. However, sunlight will degrade the PEX tile over time, so it MUST be buried as soon as possible. Here are some PEX facts from our supplier:

Q: How deep should this be buried?

A: Only 18 to 24 inches is necessary unless it will be driven over. If it will be driven over it should be buried 3 or more feet or placed within a PVC tube or culvert.

Q: What is the string for?

A: The string which is included with every roll of insulated pipe can be used to pull an electrical, thermostat, tracing wire or whatever through the corrugated tile.

Q: What is the outside diameter of the tile?

A: The 4" tile has an outside diameter of 4.7" and the 5" tile has an outside diameter of 5.7"

Q: What does "Commercial Grade Corrugated Tile" mean?

A: Our corrugated tile is DOT approved for commercial applications which means that it is thicker/stronger than other tile available to the general public.

Q: How should the trench for the insulated pipe be prepared?

A: The trench should be free of any rocks or debris. If available the corrugated tile should be surrounded by sand.

Q: What is the difference between "Non Barrier" pex tubing and "Oxygen Barrier" pex tubing?

A: Non Barrier pex tubing is used for "open" systems. Systems that arenon pressurized. Those being ones that water will need to be added to periodically and that also require a type of water treatment. Oxygen Barrier pex tubing has a coating applied to the exterior of the tubing to prevent oxygen from penetrating the tubing. Oxygen Barrier pex is used for "Closed" systems. Systems that are pressurized and once filled do not require additional water to be added nor do they require a water treatment product.

Q: How is this product delivered?

A: Most likely the shipment will be delivered via semi truck. We usually use FedEx Freight Priority Service for our freight shipments. For residential deliveries, the semi MUST be able to access your location easily to deliver your order. If your location is not easily accessible by semi you will need to make other arrangements (e.g. business with loading dock or meet the truck) to receive your order. FedEx Freight will contact you via phone number that must be provided (usually 1 day prior to delivery) to ensure that they can deliver to your location and that someone will be available to unload and sign for the delivery. It is always best is the order can be delivered to a commercial location.

Q: How long before the order is shipped?

A: We always ship within 24 hours from when your order is placed and quite often the same day.

Prices for individual components

(Prices subject to change)

Accessory Kit - $1,399.00
75 Feet 3 Wrap Insulated PEX Line
Heat exchanger for indoor furnace
20 Plate heat exchanger for hot water heater
Small pump. Pumps 100 ft. horizontally and 10 ft. vertically.
2 - 1" Ball Valve Pump Flanges
Upgrade to large pump for $80.00.

Sight Gauge - $49.00
Sight glass to quickly see the water level in the stove.

Ash Rake - $40.00
Heavy duty 5/16" rake head with 3/4" steel handle. Custom designed curved head to match our round firebox.

Spare Solenoid - $45.00
We strongly recommend keeping a spare solenoid on hand.

CAUTION! The damper door controlled by the solenoid is designed to only open about one to one and a half inches. That is all the air needed for efficient burning of your fuel. Adjusting the solenoid to open farther that that will stress the solenoid and result in premature failure.