EZ Boilers Parts & Accessories
Home Page
Prices & Specifications
Owner’s Manual
We have a variety of parts to fit any manufacturer’s stoves.
You can find the other parts and fittings for your stove installation at most hardware stores and home improvement centers. SupplyHouse.com also has very good prices for plumbing fittings.
Accessory Kit
75′ Feet 3 Wrap PEX Piping
Up to 18 x 20 Water to Air Heat Exchanger
(Can be swapped for up to 40 plate water to water exchanger)
20 Plate Water to Water Heat Exchanger
(Can be swapped for sidearm exchanger)
Small Pump
2 – 1″ Ball Valve Flanges
Our Price – $1,399.00
INSULATED PEX PIPING
3 Wrap – $7.50 per foot
5 Wrap – $10.90 per foot
HEAT EXCHANGER
18 x 20 – $253.00
PLATE EXCHANGER
Badger Insulated Pipe LLC
Part # LB20F
20 Plate – $250.00
SIDEARM HEAT EXCHANGER
Sidearm with Mixing Value – $288.00
MIXING VALVE
Valve – $172.50
AQUASTAT CONTROLLER (Thermocouple temperature switch)
Manufactured by Dwyer Instruments, Love Division.
Model TCS-4010
Controller – $175
See Owner’s Manual on how to quickly program the new controller for proper operation with your stove.
Honeywell Aquastat
Part Number L6006C1018
Used on current EZ Boilers models.
DOOR GASKET
1″ fiberglass firedoor rope gasket – $6.90 per foot
Dodds Brothers Supply Company offers a door gasket kit at a bargain price.
SOLENOID
4×240 Solenoid – $52.00 Model 2005-M-1. Manufactured by Dormeyer.
CAUTION! The damper door controlled by the solenoid is designed to open only about one inch. That is all the air required for efficient burning of your fuel. Adjusting the door to open farther than about one inch will stress the solenoid and cause it to fail prematurely.
Electronic Actuator
Part Number GQD221.1U
Used on some older models to operate the damper door.
SIGHT GLASS
Sight Glass – $86.00 Model G901-4 Manufactured by LDI INDUSTRIES
Sight Gauge grainger.com
Grainger.com part 1U614
THERMOCOUPLE PROBE
Thermocouple Probe – $80.00 Model TCP60089 Manufactured by Tempco.
PUMPS
Small Pump – $150.00. Model GPD15-6SFC. Manufactured by Badger.
Large Pump – $300.00. Model GPD25-10SFC. Manufactured by Badger.
PUMP FLANGE
1″ Ball Valve Flange Kit – $70.00 (2 flanges) Model 150SWP600WOG
Manufactured by Palconn
ANODE ROD
You MUST use ONLY a magnesium anode rod in your boiler! Aluminum anode rods will interact with the water treatment chemicals that you add to your tank to inhibit corrosion. You can purchase one at most hardware stores and big supply outlets such as Menard’s and Home Depot. Our friends at SupplyHouse.com also carry the correct magnesium rods.
CHIMNEY EXTENSIONS
We no longer manufacture or sell chimney extensions. Many hardware stores carry stove pipe. For longevity, it is wise to use double wall insulated pipe extensions. That helps avoid corrosive condensation in the extension which can occur when the exhaust is cooled too rapidly.
Outdoor Boiler Anti-Corrosion Chemical Treatment
You MUST drain your boiler once per year and add fresh water and anti-corrosion treatment. Remember, failure to do so voids the warranty. We fully recommend the following products. The manufacturer states that the chemicals have a 2-year shelf life, so don’t buy more than you need for next year.
Wood Boiler Treatment, 1 quart = $40.00. Treats up to 200 gallons.
Badger Insulated Pipe Company.
Boiler Antifreeze
It is possible to add antifreeze to your system for extra protection, such as the possibility of a power outage, or for those who expect to be away from their boiler for several days, and don’t have anyone present to keep the fire going. A hard freeze could render your system inoperable.
It works just like the antifreeze in your automobile, mixing 50/50 with water. It contains chemicals that also inhibit rust and corrosion. Just like in your car, it will last for years when maintained at the proper concentration.
Here is the product information, taken directly from the manufacturer’s website:
TRUEGARD® PG Inhibited HTF 50/50 / Concentrate
Keller-Heartt TRUEGARD® Propylene Glycol Inhibited Heat Transfer Fluid 100% is a fully-formulated propylene glycol-based heat transfer fluid containing an inhibitor and additive package that controls corrosion of metals, helps prevent scaling and the fouling of heat transfer surfaces, and buffers the pH to maintain it
in the optimum operating range. Product meets ASTM D8039 specification, which is the accepted industry
standard for multi-metal corrosion protection for steel, cast iron, aluminum, copper, brass and solder. This
fluid is compatible with most plastics, elastomers, and types of rubber. The multi-component inhibitor system
formulation makes Keller-Heartt TRUEGARD® Propylene Glycol Inhibited Heat Transfer Fluid 100% an industry leader in fluid performance.
Typical Applications:
• Natural Gas Pipeline Heaters and Bath Heaters
• Solar Protection
• Ice Rinks
• HVAC Systems; Freeze, Burst, Corrosion Protection
• Process Heating and Cooling
• Thermal Energy Storage
• Refrigeration Warehouse Floor Heating
• Sidewalk Snow Melting Systems