EZ Aquastat Programming

QUICK AND EZ PROGRAMMING

 

Programming the Aquastat

The aquastat controller for your stove is designed for many heating and cooling applications. The following steps will set you up for basic operations of your outdoor boiler. We recommend you keep these settings until you understand your heating desires and the proper operation of the aquastat controller.

 

Step-by-Step Instructions

  1. Press the SET and DOWN ARROW buttons at the same time, then release.
  2. Press and HOLD SET button for 10 seconds or until it shows a 0, then release.
  3. Press and release the SET It will read SP.
  4. Press SET again; it will read the current set point.
  5. Press the up or down arrow key until it reads 180.
  6. Press SET. It will read SP.
  7. Press UP ARROW r0 will be on display.
  8. Press SET. Press arrow up or down until it reads 7.
  9. Press SET. Display will read r0.
  10. Press UP ARROW Display will read r1.
  11. Press UP ARROW Display will read r2.
  12. Press SET.
  13. Press UP ARROW until display reads 200.
  14. Press SET. Display will read r2.
  15. Press UP ARROW. Display will read d0.
  16. Press SET.
  17. Press UP ARROW until display reads Ht.
  18. Press SET. Display reads d0.
  19. Press and release the SET and DOWN ARROW at the same time.

Your Aquastat is now programmed. During the heating season you can quickly adjust the run temperature by pressing the SET button once. The screen will read SP. Press the SET button one more time. The display will show the current temperature. Use the UP or DOWN arrow keys to adjust the current temperature.

Aquastat